MyCalCute
Install
Calculators / Construction / Trench backfill volume

Trench backfill volume calculator

Estimate rectangular trench volume after subtracting one fully buried round pipe.

On this page

Your result

Net trench volume4.49m³
Volume with allowance4.93m³

Calculator controls

How to calculate

Trench backfill volumeTrench backfill volumeTrench backfill volumeUse the outside pipe diameter because the pipe displaces fill across its entire cross-section. Concept diagram; not to scale.Trench backfill volumeTrench length(m)10Trench width (m)0.6Net trenchvolume4.48584 m³MyCalCute.comTrench length (m)10Trench width (m)0.6Net trench volume4.48584 m³
Trench backfill volumeUse the outside pipe diameter because the pipe displaces fill across its entire cross-section. Concept diagram; not to scale.Trench backfill volumeTrench length(m)10Trench width (m)0.6Net trenchvolume4.48584 m³MyCalCute.com
Use the outside pipe diameter because the pipe displaces fill across its entire cross-section. Concept diagram; not to scale.

Estimate rectangular trench volume after subtracting one fully buried round pipe.

Net trench volume = length*(width*depth-pi*diameter^2/4) m³
Volume with allowance = length*(width*depth-pi*diameter^2/4)*(1+allowance/100) m³

Worked example

  • Trench length (m): 10
  • Trench width (m): 0.6
  • Trench depth (m): 0.8
  • Pipe outside diameter (m): 0.2
  • Extra loose material (%): 10
  • Net trench volume: 4.49 m³
  • Volume with allowance: 4.93 m³

Assumptions and limits

Assumes constant dimensions and one straight pipe. Bedding, sloped sides, compaction requirements and local installation rules need separate estimates.

Results are rounded for display; calculations use unrounded values. Read our calculation methodology.

Understanding the result

Estimate rectangular trench volume after subtracting one fully buried round pipe. Use the outside pipe diameter because the pipe displaces fill across its entire cross-section.

When this tool is useful

Use the outside pipe diameter because the pipe displaces fill across its entire cross-section.

Understanding your inputs

InputExample
Trench length (m) length10
Trench width (m) width0.6
Trench depth (m) depth0.8
Pipe outside diameter (m) diameter0.2
Extra loose material (%) allowance10

Frequently asked questions

Which assumptions apply?

Assumes constant dimensions and one straight pipe. Bedding, sloped sides, compaction requirements and local installation rules need separate estimates.

How can I verify the result?

Use the values in the worked example and keep consistent units throughout the calculation.