MyCalCute
Install
Calculators / Construction / Horizontal tank fill

Horizontal tank fill calculator

Convert liquid depth in a horizontal cylinder into litres and percentage full.

On this page

Your result

Liquid volume785.4L
Fill percentage50%
Tank capacity1,570.8L

Calculator controls

How to calculate

Horizontal tank fillHorizontal tank fillHorizontal tank fillA depth equal to the radius fills half of the circular cross-section. The depth percentage and volume percentage differ away from this midpoint. Concept diagram; not to scale.Horizontal tank fillTank radius (m)0.5Internal tanklength (m)2Liquid volume785.398 LMyCalCute.comTank radius (m)0.5Internal tank length (m)2Liquid volume785.398 L
Horizontal tank fillA depth equal to the radius fills half of the circular cross-section. The depth percentage and volume percentage differ away from this midpoint. Concept diagram; not to scale.Horizontal tank fillTank radius (m)0.5Internal tanklength (m)2Liquid volume785.398 LMyCalCute.com
A depth equal to the radius fills half of the circular cross-section. The depth percentage and volume percentage differ away from this midpoint. Concept diagram; not to scale.

Convert liquid depth in a horizontal cylinder into litres and percentage full.

Liquid volume = (r^2*acos((r-depth)/r)-(r-depth)*sqrt(depth*(2*r-depth)))*length*1000 L
Fill percentage = (r^2*acos((r-depth)/r)-(r-depth)*sqrt(depth*(2*r-depth)))/(pi*r^2)*100 %
Tank capacity = pi*r^2*length*1000 L

Worked example

  • Tank radius (m): 0.5
  • Internal tank length (m): 2
  • Liquid depth from bottom (m): 0.5
  • Liquid volume: 785.4 L
  • Fill percentage: 50 %
  • Tank capacity: 1,570.8 L

Assumptions and limits

Assumes a level cylinder with flat ends and uniform radius. Domed ends, tilt, fittings and safe fill limits require tank-specific data.

Results are rounded for display; calculations use unrounded values. Read our calculation methodology.

Understanding the result

Convert liquid depth in a horizontal cylinder into litres and percentage full. A depth equal to the radius fills half of the circular cross-section. The depth percentage and volume percentage differ away from this midpoint.

When this tool is useful

A depth equal to the radius fills half of the circular cross-section. The depth percentage and volume percentage differ away from this midpoint.

Understanding your inputs

InputExample
Tank radius (m) r0.5
Internal tank length (m) length2
Liquid depth from bottom (m) depth0.5

Frequently asked questions

Which assumptions apply?

Assumes a level cylinder with flat ends and uniform radius. Domed ends, tilt, fittings and safe fill limits require tank-specific data.

How can I verify the result?

Use the values in the worked example and keep consistent units throughout the calculation.