MyCalCute
Install
Calculators / Technology / Projector throw distance

Projector throw distance calculator

Find the lens-to-screen distance range for a supplied image width and throw ratios.

On this page

Your result

Minimum throw distance3m
Maximum throw distance3.75m

Calculator controls

How to calculate

Projector throw distanceProjector throw distance1InputsScreen image width(m) · Minimum throwratio · Maximumthrow ratio2MethodMinimum throwdistance = width*lowm; Maximum throwdistance =width*high m3Result3 m
Projector throw distanceAt 2.5 metres image width, a 1.2 to 1.5 throw ratio requires a 3 to 3.75 metre throw. Concept diagram; not to scale.Projector throw distance1InputsScreen image width (m) ·Minimum throw ratio · Maximum…2MethodMinimum throw distance =width*low m; Maximum throw…3Result3 mMyCalCute.com
At 2.5 metres image width, a 1.2 to 1.5 throw ratio requires a 3 to 3.75 metre throw. Concept diagram; not to scale.

Find the lens-to-screen distance range for a supplied image width and throw ratios.

Minimum throw distance = width*low m
Maximum throw distance = width*high m

Worked example

  • Screen image width (m): 2.5
  • Minimum throw ratio: 1.2
  • Maximum throw ratio: 1.5
  • Minimum throw distance: 3 m
  • Maximum throw distance: 3.75 m

Assumptions and limits

Use the ratios for the actual projector and lens. Lens offset, zoom restrictions and installation clearance are separate.

Results are rounded for display; calculations use unrounded values. Read our calculation methodology.

Understanding the result

Find the lens-to-screen distance range for a supplied image width and throw ratios. At 2.5 metres image width, a 1.2 to 1.5 throw ratio requires a 3 to 3.75 metre throw.

When this tool is useful

At 2.5 metres image width, a 1.2 to 1.5 throw ratio requires a 3 to 3.75 metre throw.

Understanding your inputs

InputExample
Screen image width (m) width2.5
Minimum throw ratio low1.2
Maximum throw ratio high1.5

Frequently asked questions

Which assumptions apply?

Use the ratios for the actual projector and lens. Lens offset, zoom restrictions and installation clearance are separate.

How can I verify the result?

Use the values in the worked example and keep consistent units throughout the calculation.