MyCalCute
Install
Calculators / Construction / Wound roll material length

Wound roll material length calculator

Estimate the length remaining on a tightly wound roll from its diameters and material thickness.

On this page

Your result

Estimated material length131.95m
Estimated layer count300

Calculator controls

How to calculate

Wound roll material lengthWound roll material lengthWound roll material lengthThe roll’s annular cross-sectional area divided by the material thickness estimates its unwound length. Concept diagram; not to scale.Wound roll material lengthOutside rolldiameter (mm)200Core diameter(mm)80Estimatedmaterial length131.947 mMyCalCute.comOutside roll diameter (mm)200Core diameter (mm)80Estimated material length131.947 m
Wound roll material lengthThe roll’s annular cross-sectional area divided by the material thickness estimates its unwound length. Concept diagram; not to scale.Wound roll material lengthOutside rolldiameter (mm)200Core diameter(mm)80Estimatedmaterial length131.947 mMyCalCute.com
The roll’s annular cross-sectional area divided by the material thickness estimates its unwound length. Concept diagram; not to scale.

Estimate the length remaining on a tightly wound roll from its diameters and material thickness.

Estimated material length = pi*(outer^2-core^2)/(4*thickness*1000) m
Estimated layer count = (outer-core)/(2*thickness)

Worked example

  • Outside roll diameter (mm): 200
  • Core diameter (mm): 80
  • Material thickness (mm): 0.2
  • Estimated material length: 131.95 m
  • Estimated layer count: 300

Assumptions and limits

Assumes uniform thickness and negligible gaps between layers. Soft, loosely wound or compressed material can differ.

Results are rounded for display; calculations use unrounded values. Read our calculation methodology.

Understanding the result

Estimate the length remaining on a tightly wound roll from its diameters and material thickness. The roll’s annular cross-sectional area divided by the material thickness estimates its unwound length.

When this tool is useful

The roll’s annular cross-sectional area divided by the material thickness estimates its unwound length.

Understanding your inputs

InputExample
Outside roll diameter (mm) outer200
Core diameter (mm) core80
Material thickness (mm) thickness0.2

Frequently asked questions

Which assumptions apply?

Assumes uniform thickness and negligible gaps between layers. Soft, loosely wound or compressed material can differ.

How can I verify the result?

Use the values in the worked example and keep consistent units throughout the calculation.