MyCalCute
Install
Calculators / Construction / Sheet cut grid with kerf

Sheet cut grid with kerf calculator

Count identical rectangular parts in a regular cutting grid with space for the saw kerf.

On this page

Your result

Parts across4
Parts along4
Parts per sheet16

Calculator controls

How to calculate

Sheet cut grid with kerfSheet cut grid with kerfSheet cut grid with kerfCompare a rotated grid by swapping part width and length. Grain direction or cutting sequence may make rotation unsuitable. Concept diagram; not to scale.Sheet cut grid with kerfUsable sheetwidth (mm)1220Usable sheetlength (mm)2440Parts across4MyCalCute.comUsable sheet width (mm)1220Usable sheet length (mm)2440Parts across4
Sheet cut grid with kerfCompare a rotated grid by swapping part width and length. Grain direction or cutting sequence may make rotation unsuitable. Concept diagram; not to scale.Sheet cut grid with kerfUsable sheetwidth (mm)1220Usable sheetlength (mm)2440Parts across4MyCalCute.com
Compare a rotated grid by swapping part width and length. Grain direction or cutting sequence may make rotation unsuitable. Concept diagram; not to scale.

Count identical rectangular parts in a regular cutting grid with space for the saw kerf.

Parts across = floor((width+kerf)/(partWidth+kerf))
Parts along = floor((height+kerf)/(partHeight+kerf))
Parts per sheet = floor((width+kerf)/(partWidth+kerf))*floor((height+kerf)/(partHeight+kerf))

Worked example

  • Usable sheet width (mm): 1220
  • Usable sheet length (mm): 2440
  • Part width (mm): 300
  • Part length (mm): 500
  • Cut width (mm): 3
  • Parts across: 4
  • Parts along: 4
  • Parts per sheet: 16

Assumptions and limits

The model uses one orientation and a kerf between adjacent parts. Enter usable dimensions after edge trimming and reserve room for the actual cutting process.

Results are rounded for display; calculations use unrounded values. Read our calculation methodology.

Understanding the result

Count identical rectangular parts in a regular cutting grid with space for the saw kerf. Compare a rotated grid by swapping part width and length. Grain direction or cutting sequence may make rotation unsuitable.

When this tool is useful

Compare a rotated grid by swapping part width and length. Grain direction or cutting sequence may make rotation unsuitable.

Understanding your inputs

InputExample
Usable sheet width (mm) width1220
Usable sheet length (mm) height2440
Part width (mm) partWidth300
Part length (mm) partHeight500
Cut width (mm) kerf3

Frequently asked questions

Which assumptions apply?

The model uses one orientation and a kerf between adjacent parts. Enter usable dimensions after edge trimming and reserve room for the actual cutting process.

How can I verify the result?

Use the values in the worked example and keep consistent units throughout the calculation.