MyCalCute
Install
Energy

How daily use changes an LED bulb’s payback time

Compare two usage patterns for the same bulb swap and calculate the electricity savings needed to recover the purchase cost.

Method

A lower-wattage bulb saves electricity only while the light is on. The same purchase can pay back quickly in a frequently used room and slowly in a cupboard. Start with the old and new wattages, measured daily use, your electricity rate, and the extra purchase cost you want the savings to recover.

Compare lamps that provide suitable brightness and fit the fixture. Use lumens to compare brightness and check dimmer compatibility and the intended location. The watt difference describes the electricity reduction. It does not establish whether two products give equivalent light or will last for the same number of hours.

Payback at two daily usage levelsPayback at two daily usage levelsFive hours per day80 daysOne hour per day400 days
Payback at two daily usage levelsConsider replacing a 60 W lamp with a 10 W lamp at a hypothetical rate of 0.20 per kWh. The power reduction is 50 W, or 0.05 kW. At five hours per day the energy saving is 0.25 kWh per day, worth 0.05. Recovering an extra purchase cost of 4 takes 80 days under these assumptions.Payback at two daily usagelevelsFive hours perday80 daysOne hour per day400 daysMyCalCute.com
Payback at two daily usage levels

Consider replacing a 60 W lamp with a 10 W lamp at a hypothetical rate of 0.20 per kWh. The power reduction is 50 W, or 0.05 kW. At five hours per day the energy saving is 0.25 kWh per day, worth 0.05. Recovering an extra purchase cost of 4 takes 80 days under these assumptions.

View data
Five hours per day
80 days
One hour per day
400 days

Worked example

Consider replacing a 60 W lamp with a 10 W lamp at a hypothetical rate of 0.20 per kWh. The power reduction is 50 W, or 0.05 kW. At five hours per day the energy saving is 0.25 kWh per day, worth 0.05. Recovering an extra purchase cost of 4 takes 80 days under these assumptions.

At one hour per day, the same swap saves 0.05 kWh and 0.01 per day. The simple payback becomes 400 days. Across 365 days, the five-hour pattern saves 18.25 while the one-hour pattern saves 3.65. Keep the hours consistent with how the light is actually used.

<code data-no-translate>daily energy saved = (old watts − new watts) × hours per day ÷ 1000

<code data-no-translate>simple payback days = extra purchase cost ÷ daily electricity saving

Build the lighting comparisonBuild the lighting comparison1Check comparablebrightnessCompare lumens,fitting, andcompatibility2Calculate the dailysavingUse actual wattages,hours, and tariff3Divide extra cost bydaily savingCheck whether thesaving is positive
Build the lighting comparisonThis comparison includes electricity savings and the extra purchase cost entered. Replacement frequency, installation, disposal, taxes, and tariff changes can affect the overall comparison. If the daily cost saving is zero or negative, the model has no positive payback time from electricity savings alone. Check the assumptions again before using the result. Concept diagram; not to scale.Build the lighting comparison1Check comparable brightnessCompare lumens, fitting, andcompatibility2Calculate the daily savingUse actual wattages, hours, andtariff3Divide extra cost by daily savingCheck whether the saving ispositiveMyCalCute.com
Build the lighting comparison

This comparison includes electricity savings and the extra purchase cost entered. Replacement frequency, installation, disposal, taxes, and tariff changes can affect the overall comparison. If the daily cost saving is zero or negative, the model has no positive payback time from electricity savings alone. Check the assumptions again before using the result.

View data
Check comparable brightness
Compare lumens, fitting, and compatibility
Calculate the daily saving
Use actual wattages, hours, and tariff
Divide extra cost by daily saving
Check whether the saving is positive

Checks and limits

This comparison includes electricity savings and the extra purchase cost entered. Replacement frequency, installation, disposal, taxes, and tariff changes can affect the overall comparison. If the daily cost saving is zero or negative, the model has no positive payback time from electricity savings alone. Check the assumptions again before using the result.

Related calculators

Sources · ENERGY STAR brightness guidance