MyCalCute
Install
Calculators / Construction / Rectangular tube mass

Rectangular tube mass calculator

Estimate material mass for a uniform rectangular hollow section.

On this page

Your result

Cross-section material area304mm²
Tube mass7.16kg

Calculator controls

How to calculate

Rectangular tube massRectangular tube massRectangular tube massMultiply the difference between outer and inner areas by the length and density. Convert square millimetres to square metres first. Concept diagram; not to scale.Rectangular tube massOutside width(mm)50Outside height(mm)30Cross-sectionmaterial area304 mm²MyCalCute.comOutside width (mm)50Outside height (mm)30Cross-section material area304 mm²
Rectangular tube massMultiply the difference between outer and inner areas by the length and density. Convert square millimetres to square metres first. Concept diagram; not to scale.Rectangular tube massOutside width(mm)50Outside height(mm)30Cross-sectionmaterial area304 mm²MyCalCute.com
Multiply the difference between outer and inner areas by the length and density. Convert square millimetres to square metres first. Concept diagram; not to scale.

Estimate material mass for a uniform rectangular hollow section.

Cross-section material area = width*height-(width-2*wall)*(height-2*wall) mm²
Tube mass = (width*height-(width-2*wall)*(height-2*wall))*length*density/1000000 kg

Worked example

  • Outside width (mm): 50
  • Outside height (mm): 30
  • Wall thickness (mm): 2
  • Tube length (m): 3
  • Material density (kg/m³): 7850
  • Cross-section material area: 304 mm²
  • Tube mass: 7.16 KG

Assumptions and limits

Uses square corners and constant wall thickness. Real profiles can have rounded corners, seams and tolerances. Use a product mass table for procurement.

Results are rounded for display; calculations use unrounded values. Read our calculation methodology.

Understanding the result

Estimate material mass for a uniform rectangular hollow section. Multiply the difference between outer and inner areas by the length and density. Convert square millimetres to square metres first.

When this tool is useful

Multiply the difference between outer and inner areas by the length and density. Convert square millimetres to square metres first.

Understanding your inputs

InputExample
Outside width (mm) width50
Outside height (mm) height30
Wall thickness (mm) wall2
Tube length (m) length3
Material density (kg/m³) density7850

Frequently asked questions

Which assumptions apply?

Uses square corners and constant wall thickness. Real profiles can have rounded corners, seams and tolerances. Use a product mass table for procurement.

How can I verify the result?

Use the values in the worked example and keep consistent units throughout the calculation.