How to plan an EV trip with an arrival reserve
Convert a trip into battery energy, allow for a chosen arrival reserve, and test a higher-consumption scenario before relying on a range estimate.
Method
Start with the distance of one leg, usable battery capacity, and expected battery consumption for the conditions. A range figure from a label can help you compare vehicles, but planning a particular leg calls for a consumption estimate based on speed, elevation, temperature, and load. Use a measured trip with similar conditions if available.
Multiply distance in kilometres by expected battery consumption in kWh per 100 km and divide by 100. Convert your starting charge and desired arrival reserve into energy using the same usable capacity. Subtract both the trip energy and the reserve from the starting energy to find the margin.
For a 72 kWh usable battery starting at 80%, the energy at departure is 57.6 kWh. A 220 km leg at 18 kWh per 100 km uses 39.6 kWh, leaving 18.0 kWh. A 15% reserve is 10.8 kWh, so the margin above that reserve is 7.2 kWh.
View data
- Starting energy
- 57.6 kWh
- Trip energy
- 39.6 kWh
- Desired reserve
- 10.8 kWh
- Margin above reserve
- 7.2 kWh
Worked example
For a 72 kWh usable battery starting at 80%, the energy at departure is 57.6 kWh. A 220 km leg at 18 kWh per 100 km uses 39.6 kWh, leaving 18.0 kWh. A 15% reserve is 10.8 kWh, so the margin above that reserve is 7.2 kWh.
Recheck that leg at 22 kWh per 100 km. The trip now needs 48.4 kWh. The expected arrival energy falls to 9.2 kWh, which is 1.6 kWh below the chosen reserve. The difference shows how a change in consumption can affect the plan even when the distance stays the same.
<code data-no-translate>trip energy = distance × battery consumption ÷ 100
<code data-no-translate>energy margin = usable capacity × (start % − reserve %) ÷ 100 − trip energy
Use battery-side consumption for this calculation. Energy billed by a charger can include charging losses, which matters for cost. Follow the vehicle’s displayed charge and your actual conditions during the trip. If the margin is small, identify a practical charging stop and check availability before relying on it.
View data
- Estimate battery consumption
- Use a comparable route and conditions
- Set an arrival reserve
- Subtract reserve energy before assessing the leg
- Try higher consumption
- Recheck the margin and charging options
Checks and limits
Use battery-side consumption for this calculation. Energy billed by a charger can include charging losses, which matters for cost. Follow the vehicle’s displayed charge and your actual conditions during the trip. If the margin is small, identify a practical charging stop and check availability before relying on it.
Related calculators
Sources · US Department of Energy charging and EV efficiency guidance